Fibre Channel Host Adapter FC25/S

  SS4 SS5 SS10 SS20 SS600

 SS1000 SC2000 A11 A12 A14

         Option 1057

    501-2069      501-2553

FRU w/o 370-1426    w 370-1426



Notes:

1. The minimum operating system is Solaris 2.3.

2. Install the first Fibre Channel Optical Module in Slot B.



Firmware Notes:

1. The FC/25S requires firmware equal to or greater than 1.33 to boot the SPARC

   storage Array.

2. Firmware 1.33 is on FC25/S 501-2069-07 and 501-2553-03.

3. Use the OBP "sccsid" command to display the FCS25/S firmware level:

	ok setenv fcode-debug? true

	ok cd /io-unit@f,e1200000/sbi@0,0/SUNW,soc@3,0

  	ok sccsid type

	1.18 94/03/15

	ok device-end

4. Use the fc_update command to download the FC25/S firmware, then halt the 

   system and power cycle the SPARCstorage Array:

	# /cdrom/ssa_2_1_sparc/fc_update/fc_update

5. The fc_update command is not supported on the SS4 or SS5.



Booting Notes:

1. Solaris 2.3 does not support booting from the Array Controller.

2. Solaris 2.4 Hardware: 3/95, SPARCstorage Array Software 2.1 and FC25/S

   firmware greater than or equal to 1.33 are required to boot SPARCstorage

   Array.



References:

1. Fibre Channel SBus Card Installation Manual, 801-6313-10.

2. Fibre Channel Optical Module Installation Manual, 801-6326-10.

3. Fibre Channel SBus Card Product Note, 802-3237-10.

4. SPARCstorage Array 2.0 CD Insert Product Note, 804-4793-11.

5. SPARCstorage Array 2.1 CD Insert Product Note, 804-4996-10.

6. SPARCstorage Array 2.1.1 Product Note, 802-2043-11.

7. SPARCstorage Array 2.1.1 CD Product Note, 802-5314-10.