Most commonly used ssp commands cheatsheet

bringup -A off -l32	- Bringup domain by running post level 32
bringup -A on -l16	- Bringup domain by running post level 16 then
			  auto boot domain
bringup -A on net	- Bringup domain by running post level 16 then
			  auto "boot net" domain
cb_reset		- Reset control boards
domain_create -d <domain> - Create domain 
-b <board list> -o 2.8
-p <platformanme>
domain_history		-  Display deleted domains
domain_remove -d <domain>- Remove the domain
domain_rename -d <domain>
-n <newdomain>		- Rename domain
domain_status		- List configured domains
edd_cmd -x stop		- Stop edd monitoring
edd_cmd -x start	- Stop edd monitoring
fan			- fan status
hostinfo -F		- Status of fans
hostinfo -h		- cpu status
hostinfo -p		- Power status
hostinfo -t		- Temperature Status 		
hostview 		- Start GUI interface
netcon			- Get a console connection to domain
netcon_server -r	- Restart the netcon_server for $SUNW_HOSTNAME
power			- power supply statuses
power -on -all		- power on the entire platform
power -B -off		- power off the breakers on the E10000
power -off -all		- power off the entire platform
power -p 2 3 -on	- remotely power on cabinets 2 and 3
ssp_backup /tmp		- backupt ssp to a cpio file
ssp_config 		- To configure SSP for the first time.
ssp_config spare 	- To configure a spare SSP as Main ssp.
ssp_config cb 		- To configure the control boards and assign the
			  primary control board
ssp_restore backup.cpio	- Restore ssp from ssp_backup cpio file
ssp_unconfig		- To unconfigure the ssp
sys_id	-d -f <filename>- View the eeprom image, filename is the eeprom.image.domain